X3301 Multispectrum Infrared (IR) Flame Detector
Easy to Install and Maintain
FEATURES
Technical Specifications
- Multiple communication protocols, including 0-20 mA, relay, Modbus, HART, FDT®/DTM and Eagle Quantum Premier® (EQP) safety system
- Diagnostic LED for local alarm and simple fault identification
- Large capacity event log storage (1,500 events)
- HART capable
Robust and reliable multispectrum IR lame detection
The X3301 delivers fast fire detection performance while limiting nuisance and false alarms. Versatile, robust, reliable, developed and built with the needs of hazardous and critical industrial process operators in mind.
X5200 Ultraviolet Infrared Flame Detector
FEATURES
Technical Specifications
- Multiple communication protocols, including 0-20 mA, relay, Modbus, HART, FDT®/DTM and Eagle Quantum Premier® (EQP) safety system
- Diagnostic LED for local alarm and simple fault identification
- Large capacity event log storage (1,500 events)
- HART capable
- Copper-free aluminum or 316 stainless steel enclosure
UVIR detector for complex detection environments
The X5200 UVIR hydrocarbon flame detector can be configured to satisfy third-party requirements for rapid detection or for applications where extraneous IR radiation sources may cause other detectors to generate false alarms.
PM-5MPX Dual Spectrum IR Flame Detector
FEATURES
Technical Specifications
- Intrinsic safety and non-incendive hazardous location approved
- Cone of Vision 110 degrees horizontal and vertical, with the highest detector sensitivity along the central axis
- Relays: 100 milliamps maximum at 30 Vdc
- Polypropylene enclosure shows no degradation to housing or wire jacket observed after exposure to Cyclohexanone, NMP, HMDS, Photo Resist,
- Copper-free aluminum or 316 stainless steel enclosure Developer, Acetone, Isopropyl Alcohol, MEK, or Methanol at 60°C
- FM 3260 fire detection performance approved
Designed specifically to protect semiconductor fabrication processes
Flame detection in semiconductor fabrication settings presents a unique set of challenges the typical IR detector struggles to overcome. The caustic environments and aggressive products of combustion common to these high-value manufacturing processes require the best detection available. The PM-5MPX from Det-Tronics delivers.
xWatch® Explosion-proof Camera
FEATURES
Technical Specifications
- Color low light CCD
- Operating temperature range of –20°C to +70°C (–4°F to +158°F)
- Resolution: NTSC: 768 by 494 pixels, 570 lines of resolution; PAL: 752 by 582 pixels, 570 lines of resolution
- Electronic shutter speeds of 1/60 – 1/100,000 second
- Available 90-degree field of view
- Choice of aluminum or stainless steel (316/CF8M Cast) housing
Visually monitor remote high-hazard areas
Used in a stand-alone configuration or in combination with an X-Series flame detector, the xWatch® Explosion-proof Camera provides a color image with real-time viewing of a monitored area. When combined with a DVR system, it supports post-event analysis to help determine the root cause of event alarms.
This added layer of protection enables secondary confirmation of a hazardous event and is applicable for hazardous operations, remote locations and unstaffed facilities.
available. The PM-5MPX from Det-Tronics delivers.
SmokeWatch™ Explosion-Proof Smoke Detector (U5015)
Det-Tronics offers advanced photoelectric, explosion-proof smoke detectors using innovative technology that's not generally available for hazardous locations. When installed with heat, flame and gas detectors, Det-Tronics explosion-proof smoke detectors can increase the level of safety in critical, smoke-prone environments.
FEATURES
Technical Specifications
- IP44 ingress protection level suitable for onshore or offshore requirements
- Advanced photoelectric operation
- Alarm, Auxiliary, and Fault relays for controlling annunciating devices or fire panel interface
- 0-20 mA output for PLC and DCS integration
- A localized LED
- Self-checking circuitry for reliable smoke detection.
- Touble-free photoelectric operation
Hazardous location rated smoke detection
The Det-Tronics SmokeWatch™ U5015 Explosion-Proof Smoke Detector adds critical smoke detection capabilities to safety systems. This robust smoke detector is designed to operate effectively with smoldering and rapidly growing fires and contains the ability to annunciate faults ensuring no undisclosed failures.
Also, when paired with the Q5016 Duct Mount Accessory, the Q5015 can be used to monitor for smoke in forced air ductwork where air stratification is a possibility (external mounting only).
SmokeWatch™ Explosion-Proof Smoke Detector - Duct Mounted (Q5016)
Adapt the SmokeWatch smoke detector for duct monitoring
FEATURES
Adapt the SmokeWatch smoke detector for duct monitoring
The Q5016 Duct Mount Accessory is designed for use with the Det-Tronics SmokeWatch™ U5015 Explosion-Proof Smoke Detector. Used together, you can monitor for smoke in ductwork, a good solution for protecting areas served by a forced-air system.
The Q5016 Duct Mount Kit and spare parts are sold separately from the SmokeWatch™ U5015 smoke detector. Several different models of the SmokeWatch™ U5015 explosion-proof smoke detector are available to match your application's requirements.
FlexVu® Universal Display Family Overview
Standalone gas detection and control and EQP integration
Standalone gas detection and control and EQP integration
The FlexVu® Universal Display is a rugged life-safety display that provides calibration, event logging and additional capabilities at the detector. Combining a FlexVu display with any of the compatible Det-Tronics sensors enables you to create a standalone detection and response device.
A good addition to remote detectors, the FlexVu also reduces the cost of spares inventory because of its compatibility with a wide range of Det-Tronics gas detectors.
FEATURES
Technical Specifications
- 4-20 mA analog signal output with HART
- Two (2) or three (3) programmable alarm relay outputs
- One (1) fault relay output
- RS-485 Modbus communications
- 4-20 mA analog signal input
FlexSonic® Acoustic Gas Leak Detector
FEATURES
Technical Specifications
- 4-20 mA output combined with HART
- Non-contact detection
- Certified SIL 2 capable
- Analyzes 24 discrete ultrasonic bands
- Extensive data logging with removable storage
- High-performance microphone combined with advanced digital signal processing (DSP) capability
- Globally approved explosion-proof 316 stainless steel enclosure
Detecting leaks by their acoustic signature
The Det-Tronics FlexSonic® acoustic detector is the first non-contact gas leak detector of its kind. Using a sophisticated algorithm, it listens for 24 unique acoustical “fingerprints” that are characteristic of pressurized gas leaks. By tuning out nuisance ultrasonic sources, this detector reduces false alarms, so your operations run without false alarm-triggered shutdowns.
PointWatch Eclipse® PIRECL Infrared Gas Detector
FEATURES
Technical Specifications
- Continuous, fixed monitoring of flammable hydrocarbon gases from 0 to 100% Lower Flammable Limit (LFL)
- Standard device outputs include an electrically isolated 4-20 mA signal with HART communication protocol and RS-485 serial communication
- Serial communication protocols supported include MODBUS and ASCII
- Global certifications (SIL 2/FM/CSA/ATEX/IECEx)
Optical IR hydrocarbon gas detection
The PointWatch Eclipse® Model PIRECL IR Hydrocarbon Gas Detector is our most rugged stainless steel, point infrared gas detector. It is approved to be factory calibrated to detect four gases and is capable of detecting a large number of other commonly encountered hydrocarbon gases.
Ultra-High-Speed Flame Detection and Releasing Systems
Eagle Quantum Premier® Ultra-High-Speed Flame Detecting and Releasing Systems
The manufacturing of energetic materials and other specialized applications may require a flame detection and releasing system that is capable of a high-speed (not more than 500 milliseconds) or ultra-high-speed (not more than 100 milliseconds) response.
Det-Tronics offers several pre-designed, listed detection and releasing systems for ultra-high-speed flame detection and releasing (ULTRA-FDRS) applications.
Three standardized system models are available to meet the needs of the small, medium and large ultra-high-speed system users. These models utilize the listed Eagle Quantum Premier® (EQP) Fire and Gas detection and releasing system.
Each model includes an appropriately sized cabinet housing an EQP Controller, one or more high-speed deluge modules (HSDM), one enhanced discrete input-output module (EDIO), physical disconnect switches and field wiring termination terminals.
Specifications Common to Each Model
- Red painted (RAL 3020) steel enclosure, locking key handle door, fixed window (except Model Ultra FDRS RIO), mounting feet
- Lockable physical disconnect switches
- Interposing terminals to accommodate field wiring
- FM/CSA/IECEx and SIL 2 approved for indoor, non-hazardous areas
- Allows compliance with NFPA 72® and NFPA 15 (Chapter 12)
Standard Capacities
The following tables summarize the specific capacities and dimensions of the different standard ULTRA-FDRS models. Other non-standard ULTRA-FDRS options are available. These non-standard options may incur higher costs and longer lead times. You can get a copy of the tables and other ULTRA-FDRS model information for your reference here. Or, you can contact your authorized local sales representative for further assistance.
Mechanical Foam Based Stored Pressure Portable Fire Extinguishers
Safex Mechanical Foam Extinguishers are internally lined with a high grade plastic, ensuring the extinguishers are robust and durable. Available Capacities: 6 Ltr, 9 Ltr
Applictaions
AFFF is Aqueous Film Forming Foam concentrate that extinguishes liquid fires by sealing the surface of the liquid, preventing flammable vapour from reaching the air and starving the fire of fuel.
- Parking Garages
- Petrol Pumps Oil & Petrochemical Factories
- Interposing terminals to accommodate field wiring
- Paint Booths
- Chemical Processing and Storage Units
Keys Features
- ISI marked extinguishers, approved by BIS as per IS 15683: 2018
- High quality synthetic AFFF Foam as per IS 4989:2018
- Internal plastic lining for enhanced durability
- Paint BoothsHighest available fire rating
- Durable CE Approved Chrome Plated Brass Valve
- Tough polyester powder coated exterior
- Hydro-pressure tested at 35 bars
- EPDM Hose
Automatic Modular Fire Extinguishers
Suitable for unmanned areas or to safeguard vital assets, Safex Automatic Modular Fire Extinguishers automatically detect and suppress fires. Suppression Agents: FE-36, ABC Powder Available Capacities: 1 Kg, 2 Kg, 5 Kg, 10 Kg, 15 Kg
Applictaions
Safex’s Automatic Modular Fire Extinguishers are ceiling mounted and can thus put out fires that are beyond the reach of conventional fire extinguishers.
- ATMs
- Warehouses
- Data Centres
- Server Rooms
- Chemical Storage Areas
Keys Features
- Laboratory tested genuine MAP 40% Powder (MAP 90% available on request) as per IS 4308:2019 or Chemous make UL Listed FE 36 Clean Agent Gas.
- Highest available fire rating
- Best performing sprinklers with JOB branded thermo bulbs
- Tough polyester powder coated interior and exterior
- Hydro-pressure tested at 35 bars
- Easy maintenance and refilling
Electrical Insulating Mat IS 15652
The JYOTI Electrasafe“ Insulating Mat- confirming to IS: 15652: 2006 has superseded the rubber mats with IS: 5424 (old Standard) as per Govt. of India Gazette notification NO. : S.O 2086 dt.17th, July 2007.
High voltage- insulating mat
Total safety from electrical shocks up to 66 KV
- High voltage insulating mats confirming to new specification IS: 15652: 2006
- IS: 15652: 2006, ISI Marked
- Pastable type, permanently fixed, smooth trolley movement.
- Moisture-proof, fire retardant, no adverse effect of acids, alkalis transformer oil & Diesel.
- Recommended for the safety of workers on up to AC 66 KV & DC 240 V installations in all kinds of sub-stations operating HT, LT switchgear, control panels, transformer room, battery room, generator rooms and bus bar panels etc.
Keys Features
- Laboratory tested genuine MAP 40% Powder (MAP 90% available on request) as per IS 4308:2019 or Chemous make UL Listed FE 36 Clean Agent Gas.
- Highest available fire rating
- Best performing sprinklers with JOB branded thermo bulbs
- Tough polyester powder coated interior and exterior
- Hydro-pressure tested at 35 bars
- Easy maintenance and refilling
Electrical Insulating Rubber Mat IEC 61111
IS: 61111 is a standard for electrical insulating rubber mats in India. It specifies the requirements, test methods, and marking for electrical insulating mats used for electrical insulation and as a barrier against electric shock in working areas where electrical apparatus with nominal voltage up to and including 440 volts is used. It covers the material, construction, and performance requirements of the mats, including electrical insulation properties, fire resistance, and durability. The standard is published by the Bureau of Indian Standards (BIS).
Keys Features
- Anti-slip finish. Confirming to slip-resistant test
- Resistant to acid, oil and low temperatures.
- Ozone, UV and weather resistant.
- Permanent marking.
- Low maintenance.
- Highly durable & quality rubber compound.
- Fully tested to specification IEC 61111:2009.
- Provides safety for operators against electrical shock.
- List High electrical resistance up to 50 kV/50000 volts.
Chequered Electrical Mats
Electrical mats are used as a floor covering around electrical panels as a safeguard to the life and limb of the workmen due to possible leakage of current and short circuit. Rubber mars are used in power generation plants, sub-stations, workshops etc
Exceptional features:
JYOTI the only manufacturers in the whole of North India to have been granted Certification Mark License for Rubber Mats as per IS- 5424
